- 10/100 Full-Duplex Auto-Sensing Auto-MDX Ethernet port
- 14 LEDs for System, Ethernet, and Call status
- Universal 100-240VAC (contact us for 48VDC Power)
- Configuration and Management through Webinterface, CLI, Telnet, Console and SNMP
- Up to 8 Voice and FAX Calls over IP Support-Use any CODEC or T.38 FAX on any port, any time
- 2,4,6 or 8 FXS ports connect to your standard telephone with programmable tones, ringing, CLIP etc.
- 2 or 4 FXO ports connect to a PBX or the PSTN.
- Programmable call routing switches between any FXS, FXO, H.323 and SIP interface.
- Toll
Quality CODECs & T.38 FAX-Use standard G.711 or G.726 Codecs for
toll-quality or G.723.1 or G.729ab for low-bandwidth applications. T.38
FAX and FAX Bypass features allow high-quality fax over IP.
- H.323v4
and SIP Signaling are both supported at the same time in one firmware.
Maximum interoperability and deployable into any enterprise or carrier
softswitch network, or standalone.
- IPSEC VPN, Encryption, &
VLAN-Connect your telephone to IP and secure your calls with optional
IPSEC. Choose DES/3DES or AES for encryption. VLAN tagging/stripping
allows interfacing into your 802.1pQ network.
- Full ToIP� Call
Switching-Enhanced circuit-switched call routing allows user
programmable and adaptive call handling based on hunt groups,
caller/called ID and other call parameters
The
business-class SmartNode 4110 VoIP Media Gateway supports up to eight
transparent phone calls and leverages VoIP for carrier and corporate
access. Connecting to any analog phone, fax, or PBX, the SN4110 is an
effective and flexible solution for toll-bypass, remote/branch office
voice connectivity, and enhanced carrier services.
The SN4110
series is the perfect choice for phone-to-IP connectivity supporting up
to 8 FXS ports or a combination of 4 FXS and 2 or 4 FXO ports. With its
FXS analog ports the SN4110 connects to any legacy telephone or PBX and
provides dial-tone, ringing, caller-ID and other services. When
equipped with FXO ports, the local PSTN can be accessed enabling local
calling and enhanced toll-bypass applications while using a single
connected telephone. Flexible call integration allows per-port
telephone numbers, programmable call progress tones, and distinctive
ringing. With Telephony-over-IP (ToIP) call switching, calls can
automatically be routed to the PSTN or the IP network while providing
flexible numbering plans and end-to-end feature transparency. PPPoE,
DHCP, and VLAN offers universal IP connectivity and optional IPSEC VPN
with AES/3DES guarantees secure voice over the public network.
Patton's
SmartNode 4110 delivers the legacy phone interfaces, service
transparency, and flexible PSTN integration for true converged packet
voice.
Application�Remote Office/Branch Office Voice Extension and Access
In enterprise networks, transparent access to PBX features while using
existing equipment is key to low-cost operations. Now, instead of
installing a separate PBX at the remote office, the SmartNode 4110 is
able to provide transparent extension while simultaneously connecting
multiple locations. The extensions can be managed centrally and benefit
from PBX services such as calling groups, least cost routing, and call
forwarding. PSTN access allows local calls to be processed without
using corporate remote PBX resources. Additionally, the corporate PBX
can break-out and bypass any long distance charges by using the remote
office for the local gateway.
| Voice Connectivity |
� 2, 4, 6, or 8 FXS ports
- 2-wire Loopstart, RJ-11/12
- Short haul loop 1.1 KM @3REN
- EuroPOTS (ETSI EG201 188)
- Programmable AC impedence, feeding, and ring voltage; On-Hook Voltage 29VDC
- Caller-ID Type-1/2 FSK and ITU V.23/Bell 202 generation
� 2 or 4 FXO ports
- 2-wire loop-start presented as an RJ-11/12
- 2.5kV line isolation Surge Protection: Voice Ports: Tip & Ring protected by 270 V side actor
- Off-hook and ring detection, Automatic line gain, Programmable ring count
- End of Call detection, Line drop, busy tone, battery reversal detection
- Hook-Flash Sending, Hook-Flash relay, DTMF send, detect, and relay
- Caller ID FSK CLI reception and relay (Bellcore/ANSI and ETSI/ITU), Call routing based on Caller ID
- Second dial-tone for two-stage DTMF dialing, Call routing based on DTMF numbers
|
| Data Connectivity |
10/100 Full Duplex, Autosensing, Ethernet RJ-45 port |
| Voice Processing (signalling dependent) |
� Voice codes
- G.711 A-Law/ľ-Law (64kbps)
- G.726 (ADPCM 40, 32, 24, 16 kpbs)
- G.723.1 (5.3 or 6.3 kbps)
- G.729ab (8kbps)
� Up to 8 parallel voice connections
� G.168 echo cancellation
� Carrier tone detection and generation
� Silence suppression and comfort noise
� Configurable dejitter buffer
� Configurable tones (dial, ringing, busy)
� RTP/RTCP (RFC 1889) |
| Fax and Modem Support |
� G.711 Fax- and Modem-Bypass
� T.38 Fax relay (9.6 k, 14.4 k) |
| Voice Signalling |
� H.323v4
- RAS, H.225, H.245
- H.235 secure RAS
- Fast-connect, early H.245
- Gatekeeper autodiscovery, Alias registration
- Overlap dialing
- Empty capability set (call transfer, hold)
- H.323v1 call transfer, hold
� SIPv2
- Supported RFCs: 2806, 2833, 2976, 3261, 3263, 3264, 3323, 3325, 3515
- draft-ietf-sip-cc-transfer-02, draft-ietf-sip-cc-transfer-05
- draft-ietf-sip-refer-02, draft-ietf-sip-replaces-01
- draft-ietf-sip-session-timer-04, draft-ietf-sip-session-timer-08
- Caller ID, CLIR (receive from PSTN)
- Support for proxy and redirect servers
- RFC2833: DTMF Relay, SIP INFO DTMF Relay, Fax-Bypass (G.711), T.38 Fax-Relay
- Session Timer, Record-Routing, Authentication
- Compression CODECs, Fax/Modem bypass
|
| Call Routing |
� Virtual Interfaces
� Routing Criteria: Called party number (Destination) Calling party number (Source) Time of day, day of week, date
� Longest prefix match, wildcard match, regular expression match
� Number Manipulation Functions: Replace numbers Add/remove digits Regular Expressions
� Fallback Routing: Soft Fallback to alternative interface or Call Router table |
| IP Services |
� IPv4 router
� Static Routes, ICMP redirect (RFC 792), RIPv1, v2 (RFC 1058 and 2453)
� DiffServe/ToS Packet labeling
� 802.1p VLAN tagging
� Access Control Lists
� IPSEC AH & ESP Modes, preshared Keys
� AES/DES/3DES Encryption |
| Management |
� Web GUI
� Industry standard CLI with local console (CRJ-45, RS-232) and remote Telnet access
� TFTP configuration & firmware loading
� SNMP v1 agent (MIB II and private MIB)
� Built-in diagnostic tools (trace, debug) |
| Operating Environment |
� Operating temperature: 0 - 40°C
� Operating humidity: 5 - 80% (non condensing) |
| System |
� CPU Motorola MPC870 @ 66 MHz
� Memory 32MB SDRAM/8MB Flash
� Power: External universal 100 - 240 VAC (50/60 Hz) power supply
� Power dissipation: 4 - 12W model dependent |
| Compliance |
� EMC compliance: EN55022 and EN55024
� Safety compliance: EN 60950
� CE per RTTE 99/5/EC (EMC and LVD)
� FCC Part 15 Class A
� TBR-21 (FXS) |
|
|
| Ordering Information |
Email: sales@patton.com Tel: +1 301-975-1000 |
|
SN4112/JO/EUI
|
SmartNode Dual FXO VoIP Gateway, 1x10/100baseT, H.323 and SIP, External UI Power.
|
|
SN4112/JS/EUI
|
SmartNode Dual FXS VoIP Gateway, 1x10/100baseT, H.323 and SIP, External UI Power.
|
|
SN4114/2JS2JO/EUI
|
SmartNode 2 FXS & 2 FXO VoIP Gateway, 1x10/100baseT, H.323 and SIP, External UI Power.
|
|
SN4114/JO/EUI
|
SmartNode 4 FXO VoIP Gateway, 1x10/100baseT, H.323 and SIP, External UI Power.
|
|
SN4114/JS/EUI
|
SmartNode 4 FXS VoIP Gateway, 1x10/100baseT, H.323 and SIP, External UI power.
|
|
SN4116/4JS2JO/EUI
|
SmartNode 4 FXS & 2 FXO VoIP Gateway, 1x10/100baseT, H.323 and SIP, External UI Power.
|
|
SN4118/4JS4JO/EUI
|
SmartNode 4 FXS & 4 FXO VoIP Gateway, 1x10/100baseT, H.323 and SIP, External UI Power.
|
|
SN4118/JS/EUI
|
SmartNode 8 FXS VoIP Gateway, 1x10/100baseT, H.323 and SIP, External UI Power.
|
|
